PULP AND PAPER DICTIONARY


A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  




PACKAGING PAPER   A paper or paperboard used for wrapping or packing good.

PALLET                         A platform with a slatted bottom, used to hold and ship cartons of paper stacked on top of each other.  

                                       A standard amount of paper that fits on a wooden pallet. In cut-size sheets, a pallet equals 40 cartons.

PAPER                           A homogeneous sheet formed by irregularly intervening cellulose fibres.

PAPERBOARD             A heavy weight, thick, rigid and single or multi-layer sheet. What differentiates paperboard from paper is the weight of the sheet. If paperboard is very heavy it is called Board. Paper heavier than 150 gram per meter square are normally called Paperboard and paperboard heavier than 500 gram per meter square are called board.

PAPERMAKING            Invented in China by T'sai Lun some 2,000 years ago, papermaking still follows the same basic procedures. Today wood chips are cooked with chemicals to release cellulose fibres and dissolve lignin, then washed to remove impurities. Most printing papers are then bleached to lighten the colour of the pulp. Pulp is mechanically and chemically treated to impart certain desired characteristics such as strength, smoothness and sizing. Large quantity of water is added to uniformly distribution of fibres and additives. The resulting slurry, which is 99 to 99.5% water, is cascaded onto the continuously moving forming fabric of the Fourdrinier paper machine. Side-to-side shaking distributes the slurry, forming a tangled web of fibre as the water drains off. A wire mesh roll called a dandy roll, moves over the surface to modulate the turbulence and smooth the topside of the paper. A felt blanket absorbs more water from the paper and sends the sheet on through a channel of hot metal drums that dry and press the paper at the same time to give it a more even-sided finish. At this point the paper is fully dry and ready for off-machine processes such as coating, embossed finishes and supercalendering.

PAPER CUT                 The excruciating, often unforeseeable, and usually invisible-to-the-naked-eye cut received when skin slides along the edge of a piece of paper at just the wrong angle.

PAPER-INK AFFINITY The tendency for paper and ink to attract and stay attracted to each other. This keeps the ink on the paper and off the reader's hands or the next sheet. An incompatibility between ink and paper can cause printing problems.

PAPER NAPKIN    A tissue paper product used with food.  Usually provided as a stack of folded sheets.  Family or luncheon napkins are normally embossed with an overall embossing pattern, single ply, and quarter-folded .  Dinner napkins are normally embossed with a coin-edge plus a decorative border, two or more plies, and many different types of folding patterns.

PAPER SURFACE EFFICIENCY (PRINTING)   Measure of the printability of a sheet of paper which is dependent upon the amount of ink the paper absorbs, the smoothness of its surface, and the evenness of its calliper.

PAPER TOWEL   -   An absorbent tissue paper product whose primary use is to absorb liquid, and is most often used to dry hands.  It must have very good absorbency capacity, and must remain strong even when wet (a property known as wet strength).  It is supplied in roll form in most of the world, perforated for easy dispensing.

PAPETERIE                   A paper used for greeting cards, stationery, etc…which is distinctive from regular stock in that special watermarks and embossing may be used.

PAPYRUS                     The Egyptians used this aquatic plant to create a writing sheet by peeling apart the plant's tissue-thin layers and stacking them in overlapping, crosshatched pieces to form a sheet. Despite giving us the word "paper," papyrus is not a true paper. To view a picture of papyrus plant click here.

PARCHMENT                Animal skins or linings stretched and prepared as writing/painting surfaces. Produces a smooth, buttery surface.

PARCHMENTIZATION Method of treating a paper sheet with sulphuric acid to make it greaseproof.

PARENT ROLL   A large roll of paper, also called a jumbo roll, that is unwound into a machine that processes the paper in some way.  In the absorbent tissue paper industry, these processes are usually called converting and finishing processes.  The paper may be wound into the parent roll as single ply, or as multiple plies.  In some special cases, the plies may be bonded together by some means (see ply bonding) before being wound into the parent roll.

PARTICULATE              Airborne solid impurities such as those present in gaseous emissions (sodium sulphate, lime, calcium carbonate, soot).

PEEL STRENGTH       The amount of normal force required to delaminate a multiply paper. Strength measured by TAPPI useful method UM808 or other similar methods.

PERF-EMBOSSING   -   Embossing by a method that creates very small and discrete ruptures at precisely controlled locations within the material.  This process was invented at Scott Paper Company decades ago and was originally used for ScotTowels(R) (trademark now owned by Kimberly Clark).  Both embossing rollers in perf-embossing are usually engraved with the same pattern of discrete, raised, male elements, and the pattern is designed so that these elements pass between each other when the rollers are engaged in a nip.  This is also known as interdigitating embossing.

PERMEABILITY            Degree to which a fluid (gas or liquid) permeates or penetrate a porous substance such as paper or fabric.

PERFECTING PRESS A printing press that simultaneously prints both sides of a sheet of paper as it passes through the press. On other presses, printing both sides means running the sheet through the press to print one side, allowing the ink to dry, turning the paper over, and then running the sheet through the press again to print the other side.

PERFORMANCE OF EMBOSSING    The ability of an embossing pattern or machine to deliver the required product properties.  It is best determined and documented by a general method called a technology curve.

PERMANENT PAPER  A paper that can resist large chemical and physical changes over and extended time (several hundred years). This paper is generally acid-free with alkaline reserve and a reasonably high initial strength.

PERMANENCE             The degree to which paper resists deterioration over time. There is an international norm which applies to woodfree papers. The ISO 9706 international norm defines the conditions for producing "permanent" papers. A paper which fulfils these criteria can be stocked for many years under archival conditions (temperate medium and protected from light).

   Furthermore there is also the German DIN 6738 norm which can be applied to all papers.

   Under the DIN 6738 norm, longevity is classified under the following categories :

       CL 24-85 : these papers can be described as ageing-resistant,

       CL 12-80 : the lifespan of these papers is of several centuries,

       CL 6-70 : the lifespan of these papers is of at least 100 years,

       CL 640- : the lifespan of these papers is of at least 50 years.

      However in the German introduction to the ISO 9706 norm, there is a clear restriction concerning the DIN 6738 norm : "The task of archives, libraries, museums and other collections is to conserve documents on a long lasting basis". That is why printers and editors should take care to respect the requirements of the ISO 9706 norm. DIN 6738 is valid for books which will predictably be destroyed after use.

PERMANGANATE NUMBER (K NUMBER)   Chemical test performed on pulp to determine the degree of delignification.

PERMEABILITY           Degree to which a fluid (gas or liquid) permeates or penetrate a porous substance such as paper or fabric.

PERNICIOUS CONTRARIES  Any material present in waste paper that is difficult to see or detect and which might be detrimental to the paper being manufactured from the wastepaper or which might either damage paper making equipment or render repulping difficult

PEROXIDE BLEACHING OR HYDROGEN PEROXIDE BLEACHING  Method of bleaching pulp with hydrogen peroxide (H2O2) to remove lignin; reduces or avoids the need for chlorine dioxide in final bleaching.

PH (HYDROGEN ION CONCENTRATION)  A measure of the acidity (or alkalinity) of a solution. Range from 0-14 with 7 being neutral, less than 7 being acid; higher than 7 being alkaline.

PHOTODEGRADABLE  A material which undergoes destruction of its chemical structure when exposed to light. Typically, the materials become brittle with time and fragment into small pieces or powder.

PHOTOGRAPHIC PAPER  The base paper used for the production of photographic papers is a dimensionally stable, chemically neutral chemical pulp paper with wet strength properties, that must be free from contaminants. Today papers are coated on both sides with a thin polyethylene film. The cooking prevents chemicals and water entering the paper during development. This also permits shorter rinsing and drying cycles.

PICK OUT                     A problem on press caused by unevenly sealed paper, or paper with low bonding strength. The ink "picks" off weak areas of the paper, lifting coating from a coated stock or lifting fibres from an uncoated stock, and transferring them to the printing blanket.

   These fibres will eventually be transferred back onto the sheets being printed, causing inking and surface inconsistencies.

PICK RESISTANCE    The ability of paper fibres to hold together during the printing process.

PICK UP ROLL            Roll, which lifts the wet paper or paperboard off the wire to transfer to press.

PICKING (PAPERMAKING)  To transfer the wet sheet from wire part to press part. If the sheet moves unsupported is called "poor man pick up". If a solid/suction roll is used to lick/pick the sheet, it is referred as closed transfer.

PICKING (PRINTING)  The problem of ink picking off paper fibres during printing. This may be an indication of a paper with low bonding strength or the use of an ink with too much tack for the paper it is printed on.

PIGMENT                     An ingredient added to pulp to increase the brightness and opacity of white paper or dye the pulp to create a collared sheet. Pigments have very high light fastness and bleedfastness.

PIGMENTIZING           Coating of paper with a chemical agent (pigment) to reduce surface porosity and increase opacity.

PIN HOLES                   Imperfections in paper which appear as minute holes upon looking through the sheet. They originate from foreign particles, which are pressed through the sheet.

PIN-TP-PIN EMBOSSING / LAMINATING     One of several ways in which two layers or plies of embossed product are brought together in a laminating nip for a general process known as double-nip embossing laminating.  Also known as "foot-to-foot" or "tip-to-tip".  Pin-to-pin lamination means that the raised elements of each layer contact each other at their tips, which is where the bonding occurs.  In normal practice, an adhesive glue is applied to the tips of the raised elements of only one of the two layers.  The layers are pressed together in the lamination nip, where the two embossing rollers come into contact.  Other versions of embossing laminating are nested, and random registration.

PIPING                          Defect in reels, consisting of ridges running around the circumference, due to moisture take-up by the surface layers or uneven binding or hard and soft spots.

PITCH                            Resinous material present in wood (mainly softwood) that carry over into the pulping and papermaking system to form insoluble deposits.

POLYMER                    Organic chemical compounds consisting of repeating structural units. Cellulose is a polymer.

PLY                                The separate webs, which make up the sheet formed on a multi-cylinder machine. Each cylinder adds one web or ply, which is pressed to the other, the plies adhering firmly upon drying.

PLY BONDING    A process which causes plies to adhere together, usually rather weakly, so that it is fairly easy to separate the plies without tearing the paper.  When the plies are bonded much more tightly, the adhesion process is usually called laminating.  The most common ply bonding process uses a set of narrow knurled wheels that are pressed against a smooth anvil roll, and the multiple plies of paper are passed between the wheels and the anvil.  The very high pressure at the contact points between the knurling and the anvil causes the paper to fuse into glassine.  This method of ply bonding causes very visible lines in the product, sometimes described as "railroad tracks".  Other methods include the application of a tiny amount of hot-melt glue between the plies, which is completely invisible.

POINT                           A unit of paper or paperboard thickness measuring one-thousandth of an inch.

POLYMER                    A chemical term for several classes of organic or carbon containing chemicals where a monomer or single chemical molecule is connected to itself in repeating units to form a chemical "chain." An example of a polymer is cellulose, a repeating chain of glucose (sugar). Other examples are polyesters, nylons, viscose, lyocell, polyolefins and polystyrenes.

POROSITY                  The property of paper that allows the permeation of air, an important factor in ink penetration.

POSTCARD BOARD   Postcard board is either slightly mechanical or woodfree and calendared.

POST-CONSUMER WASTE PAPER  Waste paper materials recovered after being used by consumers.

POSTER PAPER         Poster paper is a highly mechanical, highly filled, mostly coloured paper that has been made weather resistant by sizing.

PRECISION SHEETING  Converting rolls of paper into finished sheet sizes in a single operation.

PRE-CONSUMER WASTE PAPER  Paper recovered after the papermaking process, but before used by a consumer.

PRESS                           A combination of two or more rolls used to press out water from wet paper web. Following are some of the types of the press.

1. Plain Press or Solid Press This is the simplest and the oldest type of press which is now a days rarely used except on very slow speed machine. The solid press consist of two solid rolls covered with rubber and or granite. The top roll is somewhat offset for the squeezed out water to flow by gravity.

2. Suction Press In this type of press, one roll is drilled and shell of the drilled roll rotates over a suction box. The squeezed water is sucked out through the felt.

3. Grooved Press In this type of press, one roll is grooved. The squeezed water is hold in the groves and removed by doctoring or sucking out on the return run of the roll.

4. Smoothing Press A plain roll press just before the dryer section start, used to smoothen the paper surface.

PRESS PART OR PRESS SECTION  The section of the paper machine which contains press (es). It is usually located between wire part and dryer part.

PRESSURE SENSITIVE COATED PAPER  Paper coated with a self-adhesive material which in dry form (solvent free) is permanently tacky at room temperature. A bond with the receiving surface may be formed by the application of pressure (e.g. by the finger or hand). A permanent adhesive is characterized by relatively high ultimate adhesion and a removable adhesive by low ultimate adhesion. Until the time of application, the adhesive surface should be covered by a suitable release coated paper.

PRESSURIZED GROUNDWOOD PULP (PGW)  Mechanical pulp produced by treating logs with steam before defibration against a grindstone under externally applied pressure.

PRINTABILITY              The overall performance of the paper on press.

PRINTING                     The transfer of ink onto paper or other materials to reproduce words and images.

PROPERTIES OF ABSORBENT TISSUE PAPER PRODUCTS       Also called attributes.  The term physical properties usually means the characteristics of the product that can be measured by a machine (objectively) and reported as a number.  These include the paper properties of basis weight, bulk or thickness, absorbency, strength (usually tensile strength), plus the as-packaged properties of roll diameter, roll firmness, stack height, stack firmness, and product weight.  The term consumer perceived properties usually means the characteristics that are better determined by human senses (subjectively).  These include appearance and softness, and sometimes fragrance. 

PULP                              A suspension of cellulose fibres in water.

PULP BOARD               Also known as Printers’ Board, this grade is made from a single web of pulp on a paper making machine, and is produced in various substances. Used for index cards and other general products, these boards may be white or collared.

PULPER                        Unit for defibrating (slushing) pulps and paper machine broke, usually at the wet end of the paper machine.

PULPING                       Pulping is the process by which plant material (wood, grass, straw etc.) is reduced to a fibrous mass. It is achieved by rupturing bonds within plant structure. It can be accomplished mechanically, thermally, chemically or some combinations of these treatments. Following table provides pulp yield and relative strength achieved using various pulping methods.

Classification  Process  Yield of Pulp  Relative Strength (SW)  Relative Strength (HW)

Mechanical  Stone Groundwood (SGW) Pulping  90-95%  5  3

Refiner Mechanical Pulping (RMP)  90-95%  5 - 6  3

Thermo Mechanical Pulping (TMP)  90%  6 - 7  **

Chemi-mechanical  Chemi-groundwood Pulping  85-90%  *  5-6

Cold Soda Pulping  85-90%  *  5 - 6

Semi-chemical  Neutral Sulphite Semi Chemical (NSSC) Pulping  65-80%  *  5 - 6

High Yield Sulphite Pulping  55-75%  7  6

High Yield Kraft Pulping  50-70%  7  6

Chemical  Kraft Pulping  40-50%  10  7-8

Sulphite Pulping  45-55%  9  7

Soda Pulping  45-55%  *  7-8

* Process not used for Softwood (SW).  ** Process not used for Hardwood (HW).

PUNCTURE RESISTANCE The puncture resistance of combined board indicates the ability of the finished container to withstand external and internal point pressure forces and to protect the product during rough handling.

CONTACT  –  Email: mark@saxonmachinery.com  –  Phone: +44 7500 115 23